We hope you love the products we recommend and just so you know that as an Amazon Associate EngineHoist.net may earn from qualifying purchases.
An engine hoist is one of the essential pieces of equipment required to lift the engine out of the car. However, the capacity of the engine hoist matters a lot. You can only use it in situations where the capacity of the hoist is greater than the weight of the engine. The minimum capacity of the engine hoist is one ton. The question then arises is, is a 1 ton engine hoist enough?
It should be noted that the ‘1 Ton’ rating only applies to situations where the boom is NOT extended. Meaning if you know that you will need to extend the boom out to accomodate your engine, the weight it will hold is greatly reduced at each increment.
so… Is a 1 ton engine hoist enough?
Technically, a 1 ton engine hoist is enough for lifting most engines. However, depending on the vehicle you are dealing with, that vehicle’s engine might be even heavier. Practically, you will experience an entirely different problem when you go with the 1 ton engine hoist. The boom length of the 1 ton engine hoist is not that great. That is why you might face some problems while lifting the engine.
Also, with engines becoming increasingly advanced, certain vehicles these days have engines heavier than 1 ton. When you couple the heavier weight with the limited boom length, you might not be able to use such an engine hoist to lift those engines.
How much can a 1 ton engine hoist hold?
The maximum weight carrying capacity of 1 ton engine hoist is around 2000 lbs. Even though technically, it comes to 2200 lbs, you have to stick to the limit of 2000 lbs only for a margin of safety.
While these are the technical limitations of the engine hoist practically, a few other parameters will determine how much a one ton engine hoist can hold. These include:
- Build quality:
There are many 1 ton engine hoists available for around $100. However, because of the substandard quality, they will suffer from wear and tear if you use them regularly. Eventually, they won’t be able to handle that weight with equal efficiency.
- The boom length:
As highlighted above, the boom length determines engine lifting capacity. The boom length of 1 ton engine hoist can lift most engines only up to a limited extent.
If you want to go with a 1 ton engine hoist, go with the excellent quality one like Prowinch 1 Ton Electric Chain Hoist
A 2 ton engine hoist is a much better option than a 1 ton hoist. However, before you choose one,, it is also essential to find out how high a 2 ton engine hoist can lift. We will answer that below.
How high can a 2 ton engine hoist lift?
Usually, a 2 ton engine hoist can lift the engine anywhere between 30 MM to 2500 MM. The larger range is because of a few factors which can vary from one engine hoist to another. These factors include:
• Boom length:
The greater the boom length of the engine hoist, the larger the lift limit will be. That is why; if you’re choosing a 2 ton engine hoist, ensure that the boom length is as long as possible.
• Lifting mechanism:
The lifting mechanism can either be manual or electric. The electric one can lift the engine at a greater height. So, it is always better to choose an engine hoist with an electric lifting mechanism.
The footprint of the engine hoist is another factor that determines the height to which the engine hoist can lift the engine. Usually speaking, the bigger the footprint, the higher will be the lift range.
Once you consider these three factors, it is easy to choose a 2 ton engine hoist that can lift the engine to 2500 MM.
How much does a 1 ton engine hoist weigh?
Usually, 1 ton engine hoist varies between 15 lbs to 200 lbs. This might seem very bulky, but since the engine hoist has to carry significant weight, it needs to be sturdy. Only when it has a proper center of gravity, well-balanced frame, and proper weight can it carry such a lot of weight.
In determining where to install the engine hoist, take into account its surface area and footprint, and then take a call.
So, is a 1 ton engine hoist enough?
If you’re wondering if 1 ton engine hoist is enough, the answer is generally no. Even though it might be able to handle the weight of most engines, the limitation of the boom length means that you won’t be able to work on every engine or lift the engine as high as possible. A much better idea is to go with a 2 ton engine hoist.